AGM Industries, Inc.
16 Jonathan Drive
Brockton, MA 02301
Tel:(508) 587-3900
Fax:(508) 587-3283
Toll Free: 800-225-9990 |
|
| AGM Model LS-600 |
| Solid State Welding System |
| For welding CD pins, cupped head pins, and threaded studs up to 5/16 - 18 (M8) diameter. |
| The LS-600 is a solid state capacitor discharge welding system designed for welding various pins up to 10 ga. (3.42mm) and threaded studs up to 5/16 - 18 (M8) diameter, using a contact welding mode. It consists of the control/power pack, Model 250C weld gun, gun lead extension and ground cable with grounding clamp. The solid state power pack provides the source of energy for the welding process and all control and timing functions. |
This system is capable of making up to 16 welds per minute, depending on the application. Weldable materials include steel, stainless steel and aluminum, as well as many of the copper and brass alloys.
Features:
• Solid State Circuitry
• Built in Circuit Breakers
• Weld Ready light
• Lightweight power pack
• Lightweight gun |
| The Model 250C Weld Gun has an operator actuated trigger button. The pin or stud must be in contact with the workpiece before the weld cycle can be actuated. Also, the control/power pack has an automatic discharge circuit, which is activated when the AC line switch is placed in the "off" position, or if the top cover is removed. These are some of the many safety features built into the AGM capacitor discharge welding system. |
| AGM uses only the highest quality components in the manufacture of their welders, thereby assuring you of many hours of trouble free operation. |
| For additional information, or to order, contact your local AGM distributor, or the factory direct at 1-800-225-9990. |
| CONTROL - POWER PACK |
WELD GUN SPEC: |
| Construction |
16 ga. (1.52mm) Fabricated Steel |
Type |
Pistol Grip |
| Dimensions |
18" (457.2mm) Lx 9 1/2 " (241.3mm)
W x 9 1/2" (241.3mm) H |
Mode |
Contact |
| Weight |
51 lbs. (23.13 Kg.) |
Weight |
2 lbs (0.9 Kg) |
| Capacitance |
60,000 MFD |
Dimensions |
8 1/2" (215.9mm) L x 2" (50.8mm) diam |
| Input Voltage |
120 VAC, 60 Hz, 15 Amps
(220 VAC. 50 Hz available for overseas use) |
Feed |
Manual |
| Weld Voltage |
100-220 DC |
|
|
| Mode of Welding |
Contact |
ACCESSORIES |
|
| Weld Polarity |
Straight or Reverse |
Gun Lead Extensions |
24 ft (7.3m) #6 Cable (Standard)
24 ft (7.3mm) #2 Cable for 5/16 - 18 (M8)
diameter studs |
| Weldable Stud Diam. |
14 ga (2.03mm) pin thru 5/16 - 18(M8)
Threaded Studs, including Cupped Head Pins.
(Aluminum Studs 1/4 - 20(M6) Non-Flanged Maximum) |
Ground Cables |
26 ft (7.9m) #6 Cable w/clamp (Standard)
12 ft (3.6m) #2 Cable w/clamp for
5/16 - 18 (M8) studs |
| Weld Rate |
Up to 16 per min.
(Based on pin/stud diam.) |
|
|
| Shipping Wt. |
83 lbs. (37.6 Kg.) |
|
|
| Cubic Ft. |
2.66 cu. ft. (.075 m3) |
|
|
|
|
